USING A POLARIZING FILTER
A circular polarizing filter screws on the front end of your lens and works something like sunglasses for your camera. A polarizer can help reduce glare and remove unwanted reflections from
non-metallic surfaces such as water or glass and improve color saturation of skies, lakes and streams, and wet surfaces.
You can see the effect of the polarizing filter through the viewfinder and change it by rotating the filter.
A polarizer works best and has the greatest effect when you are oriented 90 degrees from the sun. The least effect is seen
when shooting toward or directly away from the sun.
You do lose some light to the filter. The filter factor depends on how the filter is rotated and its orientation to the sun. Generally you lose approximately 1.3 stops. This means slower shutter speeds!
Here is how you use it. Screw the filter onto your lens, look through the viewfinder and turn the filter ring. When you
see the sky go a deep rich blue you have reached the full effect.
|1/1000 @ f/8 without filter
|1/500 @ f/8 with polarizer
© 2009-2013 Handley & Cotterman, learntotakephotos.com, All Rights Reserved
You may not copy, share, reproduce or redistribute this article in whole or in part in any form without written permission.
Contact firstname.lastname@example.org for more information